Array
(
[0] => Array
(
)
)
2
Contents
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi-
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO Ceiling ducted can be discreetly installed above a ceiling and is ideal for single or multi-room applications. The return can be
from the sides or the bottom for maximum flexibility. With up to 0.6” external static pressure, this unit can be used where ducting
is required. Use with any interior grille and louver to provide additional design flexibility. A bathroom exhaust can connect to the
dedicated stale air exhaust
Key Features 3
Technical Requirements 4
What’s Inside 5
Bottom Return 6
Airflow 6
Installation7
Clearance8
Technical Specifications 9
Performance9
ERV and Airflow 10
General 10
Electrical 11
Dimensions12
Heat pump only 13
Wiring diagram 13
Notes 14
Warranty Terms and Conditions 15
Ten Year Limited Warranty 15
What this on-site warranty covers 15
Limited Ten-Year Warranty On Compressor 15
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 16
Exclusions and Limitations 16
Nomenclature17
R32 Submittals 18
115V Heat Pump Only 18
115V Heat Pump + Elec Heat 19
230V Heat Pump Only 20
115V Heat Pump + Elec Heat 21
Array
(
[0] => Array
(
[0] => (ADP10N3H1)
)
)
18
AIO CEILING DUCTED - 115V - NO ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (ADP10N3H1)
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98-120
Running Amps Cooling 15.7
Running Amps Heating 16.5
MCA 20
Maximum Overcurrent Protection (A) 35
Recommended breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 11..20
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 14,000
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
10.9"
43"39.4"
Performance Specifications Wall Controllers + Gateways
Electric Specifications
SUBMITT AL
Array
(
[0] => Array
(
[0] => (ADE10N3H1)
)
)
19
AIO CEILING DUCTED - 115V - 900W ELECTRIC HEAT - R32 -SUBMITTAL
(ADE10N3H1)
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98-120
Running Amps Cooling 15.7
Running Amps Heating 24.3
MCA 30
Maximum Overcurrent Protection (A) 40
Recommended breaker size 30
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 11..20
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) 3,070
Total Heat Capacity w/ Elec (Btu/h) 17,070
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• 900W Electric heat supplement
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R410A Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
10.9"
43"39.4"
Performance Specifications Wall Controllers + Gateways
Electric Specifications
SUBMITT AL
Array
(
[0] => Array
(
[0] => (ADP10R3H2)
)
)
20
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 207-251
Running Amps Cooling 7.8
Running Amps Heating 8.3
MCA 10
Maximum Overcurrent Protection (A) 20
Recommended breaker size 15
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 11..20
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 14,000
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R410A R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
10.9"
43"39.4"
Performance Specifications Wall Controllers + Gateways
Electric Specifications
AIO CEILING DUCTED - 230V - NO ELECTRIC HEAT STRIP - R32 -SUBMITTAL
(ADP10R3H2)
SUBMITT AL
Array
(
[0] => Array
(
[0] => (ADK10R3H2)
)
)
21
AIO CEILING DUCTED - 115V - 115V - 900W/1,800W ELEC. HEAT
- R32 -SUBMITTAL (ADK10R3H2)
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Field configured 900W or
1,800W Electric heat supple-
ment
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
10.9"
43"39.4"
General Features
Performance Specifications
Wall Controllers + Gateways
900W 1,800W
Electric Heat
Cooling Capacity (Btu/h) 14,000 14,000
SEER2 12.89 12.89
EER2 11..20 11..20
Rev. Cycle Max Heating Capacity (Btu/h)14,000 14,000
Electric heat (BTU/h) 3,070 6,140
Total Heat Capacity w/ Elec (Btu/h) 17,070 20,140
HSPF2 8.64 8.64
Circulation (CFM) 226-400 226-400
Dehumidification (Pts/h) 1.9 1.9
900W
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 207-251
Running Amps Cooling 7.8
Running Amps Heating 12.2
MCA 15
Maximum Overcurrent Protection (A) 25
Recommended breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Electric Specifications
SUBMITT AL
Array
(
[0] => Array
(
)
)
2
Contents
CONTENTS
Key Features 3
Site Requirements 4
Louver Specifications 4
Technical requirements 4
What’s Inside 5
Airflow 6
Installation 7
Mounting Template 8
Technical Specifications 9
Performance 9
Airflow 10
General 10
Dimensions 12
Heat pump only 13
Wiring Diagram 13
Notes 14
Warranty Terms and Conditions 15
Ten Year Limited Warranty 15
What This on-site Warranty Covers 15
Limited Ten-Year Warranty On Compressor 15
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 16
Exclusions and Limitations 16
R32 Submittals 17
115V Heat Pump Only 17
115V Heat Pump + Elec Heat 18
230V Heat Pump Only 19
230 Heat Pump + Elec Heat 20
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi -
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
AIO Ceiling Suspended can be discreetly installed above a ceiling and is ideal for single or multi-room applications. The return can be
from the sides or the bottom for maximum flexibility. With up to 0.6” external static pressure, this unit can be used where ducting is
required. Use with any interior grille and louver to provide additional design flexibility.
© 2025 Ephoca. All rights reserved.
Array
(
[0] => Array
(
)
)
17
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
1. EER2 and SEER2 are based on nominal capacity of 7,800 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,300 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• Compact slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Performance Specifications
Cooling Capacity (Btu/h) 14,000
SEER2 13.35
EER2 10.18
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
HSPF2 8.56
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98-120
Running Amps Cooling 15.7
Running Amps Heating 16.5
MCA 20
Maximum Overcurrent Protection (A) 35
Recommended breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
SUBMITTAL
AIO CEILING SUSPENDED WITH ERV - 115V - NO ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (ASP2N3H1)
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
"12.3
33.2"
43.1"
Array
(
[0] => Array
(
[0] => (ASE10R3H1)
)
)
18
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
AIO CEILING SUSPENDED WITH ERV - 115V - 900W ELECTRIC HEAT - R32
-SUBMITTAL (ASE10R3H1)
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• 900W Electric heat supplement
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• Electronically controlled air
louver
• Compact slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Performance Specifications
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 10.2
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) 3,070
Total Heat Capacity w/ Elec (Btu/h) 17,070
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 15.7
Running Amps Heating 24.3
MCA 30
Maximum Overcurrent Protection (A) 40
Recommended breaker size 30
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
SUBMITTAL
"12.3
33.2"
43.1"
Array
(
[0] => Array
(
[0] => (ASP10N3H2)
)
)
19
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 207-251
Running Amps Cooling 7.8
Running Amps Heating 8.3
MCA 10
Maximum Overcurrent Protection (A) 20
Recommended breaker size 15
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
• BLDC inverter compressor
• ECM fans
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• Compact slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
AIO CEILING SUSPENDED WITH ERV - 230V - NO ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (ASP10N3H2)
SUBMITTAL
1. EER2 and SEER2 are based on nominal capacity of 7,800 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,300 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 14,000
SEER2 13.35
EER2 10.18
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
HSPF2 8.56
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
"12.3
33.2"
43.1"
Array
(
[0] => Array
(
[0] => (ASK10N3H2)
)
)
20
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Field configured 900W or
1,800W Electric heat supple-
ment
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Optional add-on ERV
• Washable filters
• Compact slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
Performance Specifications
900W 1,800W
Electric Heat
Cooling Capacity (Btu/h) 14,000 14,000
SEER2 13.35 13.35
EER2 10.18 10.18
Rev. Cycle Max Heating Capacity (Btu/h)14,000 14,000
Electric heat (BTU/h) 3,070 6,140
Total Heat Capacity w/ Elec (Btu/h) 17,070 20,140
HSPF2 8.56 8.56
Circulation (CFM) 226-400 226-400
Dehumidification (Pts/h) 1.9 1.9
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Electric Specifications
900W 1,800W
Power Supply (V Ph, Hz) 230/1/60230/1/60
Voltage Range 207-251 207-251
Running Amps Cooling 7.8 7.8
Running Amps Heating 12.2 16.1
MCA 15 20
Maximum Overcurrent Protection (A) 25 30
Recommended breaker size 20 25
Max Power Input (watts) Cooling 1,800 1,800
Max Power Input (watts) Heating 2,700 3,600
SUBMITTAL
AIO CEILING SUSPENDED WITH ERV - 208/230V -1800W ELECTRIC HEAT -
R32 -SUBMITTAL (ASK10N3H2)
LCDI Power Cords
Electric Heat Whip Plug SKU
□ + 900W 72 in.NEMA 6-15PL220v15a
□ + 1800W 72 in.NEMA 6-20PL220v20a
"12.3
33.2"
43.1"
Array
(
[0] => Array
(
)
)
2
Contents
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi-
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
AIO Ceiling Suspended can be discreetly installed above a ceiling and is ideal for single or multi-room applications. The return can be
from the sides or the bottom for maximum flexibility. With up to 0.6” external static pressure, this unit can be used where ducting is
required. Use with any interior grille and louver to provide additional design flexibility.
Key Features 3
Technical requirements 4
Site Requirements 4
Louver Specifications 4
What’s Inside 5
Airflow 6
Installation7
Technical Specifications 8
Performance 8
ERV and Airflow 9
General 9
Electrical 10
Dimensions11
Heat pump only 12
Wiring Diagram 12
Notes 13
Warranty Terms and Conditions 14
Ten Year Limited Warranty 14
What this on-site warranty covers 14
Limited Ten-Year Warranty On Compressor 14
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 15
Exclusions and Limitations 15
R32 Submittals 16
115V Heat Pump Only 16
115V Heat Pump + Elec Heat 17
230V Heat Pump Only 18
230 Heat Pump + Elec Heat 19
© 2025 Ephoca. All rights reserved.
Array
(
[0] => Array
(
[0] => (ASP20R3H1)
)
)
16
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98-120
Running Amps Cooling 15.7
Running Amps Heating 16.5
MCA 20
Maximum Overcurrent Protection (A) 35
Recommended breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 10.2
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 14,000
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Performance Specifications Wall Controllers + Gateways
Electric Specifications
SUBMITTAL
AIO CEILING SUSPENDED WITH ERV - 115V - NO ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (ASP20R3H1)
11.6"
45.2"41.4"
Array
(
[0] => Array
(
[0] => (ASE10R3H1)
)
)
17
AIO CEILING SUSPENDED WITH ERV - 115V - 900W ELECTRIC HEAT - R32
-SUBMITTAL (ASE10R3H1)
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 15.7
Running Amps Heating 24.3
MCA 30
Maximum Overcurrent Protection (A) 40
Recommended breaker size 30
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 10.2
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) 3,070
Total Heat Capacity w/ Elec (Btu/h) 17,070
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• 900W Electric heat supplement
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Performance Specifications Wall Controllers + Gateways
Electric Specifications
SUBMITTAL
11.6"
45.2"41.4"
Array
(
[0] => Array
(
[0] => (ASP10R3H2)
)
)
18
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
General Features
Electric Heat
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 207-251
Running Amps Cooling 7.8
Running Amps Heating 8.3
MCA 10
Maximum Overcurrent Protection (A) 20
Recommended breaker size 15
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Cooling Capacity (Btu/h) 14,000
SEER2 12.89
EER2 10.2
Rev. Cycle Max Heating Capacity (Btu/h) 14,000
Electric heat (BTU/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 14,000
HSPF2 8.64
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R410A R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Performance Specifications Wall Controllers + Gateways
Electric Specifications
AIO CEILING SUSPENDED WITH ERV - 230V - NO ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (ASP10R3H2)
SUBMITTAL
11.6"
45.2"41.4"
Array
(
[0] => Array
(
[0] => (ASK10R3H2)
)
)
19
1. EER2 and SEER2 are based on nominal capacity of 7,400 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• Field configured 900W or
1,800W Electric heat supple-
ment
• Integrated ERV
• Bathroom exhaust connection
• MERV 13 filters on fresh air
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Onboard touch controller
• Washable filters
• 3 selectable fan speeds + Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 years on parts
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T o Submitted By: P.O. Number:
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Features
Performance Specifications Wall Controllers + Gateways
900W 1,800W
Electric Heat
Cooling Capacity (Btu/h) 14,000 14,000
SEER2 12.89 12.89
EER2 11..20 11..20
Rev. Cycle Max Heating Capacity (Btu/h)14,000 14,000
Electric heat (BTU/h) 3,070 6,140
Total Heat Capacity w/ Elec (Btu/h) 17,070 20,140
HSPF2 8.64 8.64
Circulation (CFM) 226-400 226-400
Dehumidification (Pts/h) 1.9 1.9
900W 1,800W
Power Supply (V Ph, Hz) 230/1/60230/1/60
Voltage Range 207-251 207-251
Running Amps Cooling 7.8 7.8
Running Amps Heating 12.2 16.1
MCA 15 20
Maximum Overcurrent Protection (A) 25 30
Recommended breaker size 20 25
Max Power Input (watts) Cooling 1,800 1,800
Max Power Input (watts) Heating 2,700 3,600
Electric Specifications
SUBMITTAL
AIO CEILING SUSPENDED WITH ERV - 230V - 900W/1800W ELECTRIC HEAT
- R32 -SUBMITTAL (ASK10R3H2)
11.6"
45.2"41.4"
Array
(
[0] => Array
(
)
)
2
Contents
Key Features 3
Technical Requirements 4
Site Requirements 4
Louver Specifications 4
What’s Inside 5
Airflow 6
Installation 7
Clearances 8
Additional Connections 9
Technical Specifications 10
Performance 10
General / Airflow 11
Electrical 12
Dimensions 13
Wiring Diagrams 14
Heat Pump Only 14
Heat Pump + Electric Heat 15
Wiring Diagram Notes 16
Mounting template 17
Warranty 18
What This On-Site Warranty Covers 18
Optional Extended Five, Ten and 15 Year
Comprehensive Warranty 18
Exclusions and Limitations 19
Nomenclature 20
R32 Submittals 21
115V Heat Pump Only 21
1230V Heat Pump Only 22
230V Heat Pump + Elec Heat 23
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi -
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO Wall Mounted units are slim and sleek. The wall-mounted unit can be mounted high or low with a factory-supplied bracket, mak -
ing installation quick and simple. An electronically controlled louver with an auto-swing function distributes airflow comfortably and
uniformly. Wall-mounted units are ideal for any area with free wall space. The onboard touch controller simplifies use and installa-
tion. Special adapters enable the unit to be installed perpendicular to an outside wall, used with many louver styles, or even vented
through an existing window frame with no construction required. Wall’s powerful external ECM condenser fan sits inside the vent
pipe or adapter.
Array
(
[0] => Array
(
[0] => (AWP10N3H1)
)
)
20
SUBMITT AL
AIO WALL MOUNTED -115V - NO ELECTRIC HEAT STRIP - R32 -SUBMITTAL
(AWP10N3H1)
1. EER2 and SEER2 are based on nominal capacity of 7,700 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 7,500 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Performance Specifications
Cooling Capacity (Btu/h) 10,200
SEER2 11.95
Rev. Cycle Heating Capacity (Btu/h) 10,100
Total Heat Capacity w/ Elec (Btu/h) 10,100
HSPF2 6.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 7.7
Max Amps Cooling 8.8
Running Amps Heating 6.3
Max Amps Heating 8.8
MCA 13
Maximum Overcurrent Protection (A) 25
Recommend breaker size 15
Max Power Input (watts) Cooling 1,630
Max Power Input (watts) Heating 1,630
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
53 5/16"
[1354]
6 15/16" [177]
19" [482]
50 1/8" [1274]
9 1/2" [241]
16 5/8" [422]
11 9/16" [293]
Ø6" [Ø160]
FRONT
TOP
LEFT RIGHT
REAR
7 15/16"
[201] DISPLAY
3 5/8" [92]
1 3/16" [30]
53.3"
19"
Array
(
[0] => Array
(
)
)
2
Contents
Contents2
Key Features 3
Site Requirements 4
Louver Specifications 4
Technical requirements 4
What’s Inside 5
Airflow 6
Installation8
Clearance9
Performance 10
Technical Specifications 10
ERV and Airflow 11
General 11
Electrical 12
Dimensions 13
Heat Pump Only 15
Wiring diagram 15
Notes 16
Warranty Terms and Conditions 17
Ten Year Limited Warranty 17
What This On-site Warranty Covers 17
Full One-Year Warranty 17
Limited Ten-Year Warranty On Compressor 17
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 18
Exclusions and Limitations 18
R32 Submittals 21
115V Heat Pump Only 21
115V Heat Pump + Elec Heat 22
230V Heat Pump Only 23
230 Heat Pump + Elec Heat 24
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi -
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO vertical stack is the ideal multi-room solution when a ceiling-mounted unit is not desired or feasible. The compact 12-inch by
25-inch compact footprint uses minimal floor space. This unit is perfect anywhere direct venting or ducting is required with up to 0.6”
external static pressure. Use any grille and louvers for maximum design flexibility.
Array
(
[0] => Array
(
[0] => (AVP10R3H1)
)
)
19
SUBMITT AL
AIO VERTICAL STACK - 115V -NO ELECTRIC HEAT - R32 -SUBMITTAL
(AVP10R3H1)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disburse-
ment systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Electronically controlled
air louver
• Compact, slim design
• 3 selectable fan speeds +
Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 13.29
EER2 11.43
Rev. Cycle Max Heating Capacity (Btu/h) 15,000
Electric heat (Btu/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 15,000
HSPF2 8.86
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
ERV performance
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
86.7 85.2 83.1
Latent 72.5 65.1 60.3
Efficiency of core in summer
Sensible
%
71.1 69.4 68.1
Latent 56.2 54.5 51.2
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.6% at 0.40”2.4% at 0.40”2.2% at 0.40”
External 2.8% at 1.0”2.7% at 1.0”2.5% at 1.0”
Electric Specifications
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 15.7
Max Amps Cooling 16.5
Running Amps Heating 20
Max Amps Heating 35
MCA 20
Maximum Overcurrent Protection (A) 1,800
Recommend breaker size 1,800
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
POWER
SUPPLY
SUPPLY AIR ( optional )
ELECRITCAL PANEL
SERVICE DISPLAY
FILTER CAP
27.28”
81.89”
4.05”19.17”4.05”
1.1”1.1”
1.97”
7.56”1.06” 3.54” 7.56”
FILTER
0.63” 23.58” 22.09” 18.62” 17.56”
5.43”6.97”
FILTER
12.4”
6.97”5.43”
11.5” 8.86”
7.44”
1
1
1
1
2
2
0.71”0.71”
13.64”13.64”
SUPPLY AIR ( optional )
4.01” 6.69” 1.69”
4.49”18.31”4.49”
CONDENSATE
DISCHARGE
8” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
HOLE FOR
ANCHOR
HOLE FOR
ANCHOR HOLE FOR
ANCHOR
HOLE FOR
ANCHOR
12.4"
81.89"
28.7"
Array
(
[0] => Array
(
[0] => (AVK10R3H2)
)
)
20
SUBMITT AL
AIO VERTICAL STACK - 230V - 900W/1,800W ELECTRIC HEAT STRIP - R32
-SUBMITTAL (AVK10R3H2)
• BLDC inverter compressor
• ECM fans
• R410A Refrigerant
• Field configured 900W
or 1,800W Electric heat
supplement
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disburse-
ment systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Compact, slim design
• 3 selectable fan speeds +
Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
ERV performance
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
86.7 85.2 83.1
Latent 72.5 65.1 60.3
Efficiency of core in summer
Sensible
%
71.1 69.4 68.1
Latent 56.2 54.5 51.2
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.6% at 0.40”2.4% at 0.40”2.2% at 0.40”
External 2.8% at 1.0”2.7% at 1.0”2.5% at 1.0”
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
900W 1,800W
Electric Heat
Cooling Capacity (Btu/h) 15,000 15,000
SEER2 13.29 13.29
EER2 11.43 11.43
Rev. Cycle Max Heating Capacity (Btu/h)15,000 15,000
Electric heat (BTU/h) 3,070 6,140
Total Heat Capacity w/ Elec (Btu/h) 18,070 21,140
HSPF2 8.86 8.86
Circulation (CFM) 226-400 226-400
Dehumidification (Pts/h) 1.9 1.9
900W 1,800W
Power Supply (V Ph, Hz) 230/1/60230/1/60
Voltage Range 190 - 251190 - 251
Running Amps Cooling 7.8 7.8
Running Amps Heating 12.2 16.1
MCA 15 20
Maximum Overcurrent Protection (A) 25 30
Recommended breaker size 20 25
Max Power Input (watts) Cooling 1,800 1,800
Max Power Input (watts) Heating 2,700 3,600
Electric Specifications
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
POWER
SUPPLY
SUPPLY AIR ( optional )
ELECRITCAL PANEL
SERVICE DISPLAY
FILTER CAP
27.28”
81.89”
4.05”19.17”4.05”
1.1”1.1”
1.97”
7.56”1.06” 3.54” 7.56”
FILTER
0.63” 23.58” 22.09” 18.62” 17.56”
5.43”6.97”
FILTER
12.4”
6.97”5.43”
11.5” 8.86”
7.44”
1
1
1
1
2
2
0.71”0.71”
13.64”13.64”
SUPPLY AIR ( optional )
4.01” 6.69” 1.69”
4.49”18.31”4.49”
CONDENSATE
DISCHARGE
8” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
HOLE FOR
ANCHOR
HOLE FOR
ANCHOR HOLE FOR
ANCHOR
HOLE FOR
ANCHOR
12.4"
81.89"
28.7"
Array
(
[0] => Array
(
[0] => (AVK10R3H1)
)
)
21
Electric Specifications
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 13.29
EER2 11.43
Rev. Cycle Max Heating Capacity (Btu/h) 15,000
Electric heat (Btu/h) 3,070
Total Heat Capacity w/ Elec (Btu/h) 18,070
HSPF2 8.86
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
AIO VERTICAL STACK - 115V - 900W ELECTRIC HEAT - R32 -SUBMITTAL
(AVK10R3H1)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Field configured 900W
Electric heat supplement
• Auto Restart
• Intelligent defrost
• No outdoor unit
• Condensate disburse-
ment systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Compact, slim design
• 3 selectable fan speeds
+ Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
SUBMITT AL
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
ERV performance
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
86.7 85.2 83.1
Latent 72.5 65.1 60.3
Efficiency of core in summer
Sensible
%
71.1 69.4 68.1
Latent 56.2 54.5 51.2
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.6% at 0.40”2.4% at 0.40”2.2% at 0.40”
External 2.8% at 1.0”2.7% at 1.0”2.5% at 1.0”
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 15.7
Running Amps Heating 24.3
MCA 30
Maximum Overcurrent Protection (A) 40
Recommend breaker size 30
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
POWER
SUPPLY
SUPPLY AIR ( optional )
ELECRITCAL PANEL
SERVICE DISPLAY
FILTER CAP
27.28”
81.89”
4.05”19.17”4.05”
1.1”1.1”
1.97”
7.56”1.06” 3.54” 7.56”
FILTER
0.63” 23.58” 22.09” 18.62” 17.56”
5.43”6.97”
FILTER
12.4”
6.97”5.43”
11.5” 8.86”
7.44”
1
1
1
1
2
2
0.71”0.71”
13.64”13.64”
SUPPLY AIR ( optional )
4.01” 6.69” 1.69”
4.49”18.31”4.49”
CONDENSATE
DISCHARGE
8” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
HOLE FOR
ANCHOR
HOLE FOR
ANCHOR HOLE FOR
ANCHOR
HOLE FOR
ANCHOR
12.4"
81.89"
28.7"
Array
(
[0] => Array
(
[0] => (AVP10R3H2)
)
)
22
AIO VERTICAL STACK -230V -NO ELECTRIC HEAT - R32 -SUBMITTAL
(AVP10R3H2)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disburse-
ment systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Compact, slim design
• 3 selectable fan speeds
+ Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 13.29
EER2 11.43
Rev. Cycle Max Heating Capacity (Btu/h) 15,000
Electric heat (Btu/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 15,000
HSPF2 8.86
Circulation (CFM) 226-400
Dehumidification (Pts/h) 1.9
ERV performance
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
86.7 85.2 83.1
Latent 72.5 65.1 60.3
Efficiency of core in summer
Sensible
%
71.1 69.4 68.1
Latent 56.2 54.5 51.2
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.6% at 0.40”2.4% at 0.40”2.2% at 0.40”
External 2.8% at 1.0”2.7% at 1.0”2.5% at 1.0”
SUBMITT AL
Electric Specifications
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 190 - 251
Running Amps Cooling 7.8
Max Amps Cooling 8.3
Running Amps Heating 10
Max Amps Heating 20
MCA 15
Maximum Overcurrent Protection (A) 1,800
Recommend breaker size 1,800
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
POWER
SUPPLY
SUPPLY AIR ( optional )
ELECRITCAL PANEL
SERVICE DISPLAY
FILTER CAP
27.28”
81.89”
4.05”19.17”4.05”
1.1”1.1”
1.97”
7.56”1.06” 3.54” 7.56”
FILTER
0.63” 23.58” 22.09” 18.62” 17.56”
5.43”6.97”
FILTER
12.4”
6.97”5.43”
11.5” 8.86”
7.44”
1
1
1
1
2
2
0.71”0.71”
13.64”13.64”
SUPPLY AIR ( optional )
4.01” 6.69” 1.69”
4.49”18.31”4.49”
CONDENSATE
DISCHARGE
8” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
6” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
8” DUC T ( optional )
HOLE FOR
ANCHOR
HOLE FOR
ANCHOR HOLE FOR
ANCHOR
HOLE FOR
ANCHOR
12.4"
81.89"
28.7"
Array
(
[0] => Array
(
)
)
2
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi-
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO vertical stack is the ideal multi-room solution when a ceiling-mounted unit is not desired or feasible. The compact 12-inch by
25-inch compact footprint uses minimal floor space. This unit is perfect anywhere direct venting or ducting is required with up to 0.6”
external static pressure. Use any grille and louvers for maximum design flexibility.
Key Features3
Technical requirements4
Site Requirements 4
Louver Specifications 4
What’s Inside5
Airflow6
Fan Coil Part 7
Condenser Part 7
Installation8
Technical Specifications 9
Performance 9
ERV and Airflow 10
General 10
Electrical 11
Dimensions 12
Warranty Terms and Conditions 13
Ten Year Limited Warranty 13
What This On-site Warranty Covers 13
Limited Ten-Year Warranty On Compressor 13
Optional Extended Five, Ten and Fifteen Year
Comprehensive Warranty 14
Exclusions and Limitations 14
R32 Submittals 15
230V Heat Pump Only+ Elec Heat 15
230V Heat Pump 16
Array
(
[0] => Array
(
)
)
15
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted To Submitted By: P.O. Number:
71.6"
24.2"
23.4"
SUBMITTAL
AIO VERTICAL STACK XL - 230V -NO ELECTRIC HEAT - R32 -SUBMITTAL (AX -
P10N3H2)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds +
Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 24,000
SEER2 13.91
Rev. Cycle Max Heating Capacity (Btu/h) 24,000
Electric heat (Btu/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 24,000
HSPF2 9.12
Circulation (CFM) 287 -710
Dehumidification (Pts/h) 1.9
Electric Specifications
General Accessories
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
83 80 78
Latent 60 55 52
Efficiency of core in summer
Sensible
%
68 64 61
Latent 56 53 50
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.4% at 0.40”2.1% at 0.40”1.8% at 0.40”
External 2.5% at 1.0”2.3% at 1.0”2.0% at 1.0”
Electric Heat
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 180-253
Running Amps Cooling 12.9
Running Amps Heating 12.2
MCA 17
Maximum Overcurrent Protection (A) 30
Recommend breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Array
(
[0] => Array
(
)
)
16
1. EER2 and SEER2 are based on nominal capacity of 8,500 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 9,000 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
SUBMITTAL
AIO VERTICAL STACK XL - 230V - 1,800W/3,600W ELECTRIC HEAT STRIP -
R32 -SUBMITTAL (AXE10N3H2/AXK10N4H2)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Field configured1800W or
3,600W Electric heat supple-
ment
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Integrated ERV
• Washable filter
• Compact, slim design
• 3 selectable fan speeds +
Auto
• 10 Year limited warranty
includes 1 year parts and
labor and Additional 9
• Made in Italy
General Features
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
Performance Specifications
1,800W 3,600W
Electric Heat
Cooling Capacity (Btu/h) 24,000 24,000
SEER2 13.91 13.91
Rev. Cycle Max Heating Capacity (Btu/h)24,000 24,000
Electric heat (BTU/h) 6,140 12,300
Total Heat Capacity w/ Elec (Btu/h) 30,140 36,300
HSPF2 9.12 9.12
Circulation (CFM) 287 -710287 -710
Dehumidification (Pts/h) 1.9 1.9
1,800W 3,600W
Power Supply (V Ph, Hz) 230/1/60230/1/60
Voltage Range 180-253 180-253
Running Amps Cooling 12.9 12.9
Running Amps Heating 20.0 27.9
MCA 25 33
Maximum Overcurrent Protection (A) 35 40
Recommended breaker size 30 35
Max Power Input (watts) Cooling 1,800 1,800
Max Power Input (watts) Heating 3,600 5,400
Electric Specifications
General Accessories
General
Flow type Counterflow enthalpy exchanger
Material
Mold and bacteria resistant, washable polymer
membrane
ASHRAE compliance62.1 And 62.2 When used with the ERV module
40 CFM 60 CFM 80 CFM
Efficiency of core in winter
Sensible
%
83 80 78
Latent 60 55 52
Efficiency of core in summer
Sensible
%
68 64 61
Latent 56 53 50
Filter
Indoor air
MERV
MERV 3 / optional MERV 13
Outside air MERV 13
Leakage
Internal 2.4% at 0.40”2.1% at 0.40”1.8% at 0.40”
External 2.5% at 1.0”2.3% at 1.0”2.0% at 1.0”
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted To Submitted By: P.O. Number:
71.6"
24.2"
23.4"
Array
(
[0] => Array
(
)
)
2
Contents
Key Features 3
Technical Requirements 4
Site Requirements 4
Louver Specifications 4
What’s Inside 5
Airflow 6
Installation 7
Clearances 8
Additional Connections 9
Technical Specifications 10
Performance 10
General / Airflow 11
Electrical 12
Dimensions 13
Wiring Diagrams 14
Heat Pump Only 14
Heat Pump + Electric Heat 15
Wiring Diagram Notes 16
Mounting template 17
Warranty 18
What This On-Site Warranty Covers 18
Optional Extended Five, Ten and 15 Year
Comprehensive Warranty 18
Exclusions and Limitations 19
Nomenclature 20
R32 Submittals 21
115V Heat Pump Only 21
1230V Heat Pump Only 22
230V Heat Pump + Elec Heat 23
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi -
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO Wall Mounted units are slim and sleek. The wall-mounted unit can be mounted high or low with a factory-supplied bracket, mak -
ing installation quick and simple. An electronically controlled louver with an auto-swing function distributes airflow comfortably and
uniformly. Wall-mounted units are ideal for any area with free wall space. The onboard touch controller simplifies use and installa-
tion. Special adapters enable the unit to be installed perpendicular to an outside wall, used with many louver styles, or even vented
through an existing window frame with no construction required. Wall’s powerful external ECM condenser fan sits inside the vent
pipe or adapter.
Array
(
[0] => Array
(
[0] => (AWP10N3H1)
)
)
21
SUBMITT AL
AIO WALL MOUNTED -115V - NO ELECTRIC HEAT STRIP - R32 -SUBMITTAL
(AWP10N3H1)
1. EER2 and SEER2 are based on nominal capacity of 7,700 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 7,500 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Performance Specifications
Cooling Capacity (Btu/h) 10,200
SEER2 11.95
Rev. Cycle Heating Capacity (Btu/h) 10,100
Total Heat Capacity w/ Elec (Btu/h) 10,100
HSPF2 6.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115/1/60
Voltage Range 98 - 120
Running Amps Cooling 7.7
Max Amps Cooling 8.8
Running Amps Heating 6.3
Max Amps Heating 8.8
MCA 13
Maximum Overcurrent Protection (A) 25
Recommend breaker size 15
Max Power Input (watts) Cooling 1,630
Max Power Input (watts) Heating 1,630
21.9"
39.7"
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
Array
(
[0] => Array
(
[0] => (AWP10N3H2)
)
)
22
SUBMITT AL
AIO WALL MOUNTED - 230V - NO ELECTRIC HEAT STRIP - R32 -SUBMITTAL
(AWP10N3H2)
1. EER2 and SEER2 are based on nominal capacity of 7,700 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 7,500 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Auto restart
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted T oSubmitted By: P.O. Number:
General Features
Performance Specifications
Cooling Capacity (Btu/h) 10,200
SEER2 11.95
Rev. Cycle Heating Capacity (Btu/h) 10,100
Electric heat ( Btu.h) N/A
Total Heat Capacity w/ Elec (Btu/h) 10,100
HSPF2 6.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 230/1/60
Voltage Range 207 - 251
Running Amps Cooling 3.9
Max Amps Cooling 4.4
Running Amps Heating 3.1
Max Amps Heating 6.4
MCA 6
Maximum Overcurrent Protection (A) 15
Recommend breaker size 15
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
LCDI Power Cords
Electric Heat Whip Plug SKU
□ + 900W 72 in.NEMA 6-15PL220v15a
21.9"
39.7"
Array
(
[0] => Array
(
)
)
2
Key Features 3
Technical Requirements 4
Site Requirements 4
Louver Specifications 4
What’s Inside 5
Airflow 6
Installation 7
Clearances 8
Additional Connections 9
Technical Specifications 10
Performance 10
General / Airflow 11
Electrical 12
External Fan 13
Dimensions 14
Wiring Diagrams 15
Heat Pump Only 15
Heat Pump + Electric Heat 16
Wiring Diagram Notes 17
Mounting template 18
Warranty 20
What This On-Site Warranty Covers 20
Optional Extended Five, Ten and 15 Year
Comprehensive Warranty 20
Exclusions and Limitations 21
Nomenclature 22
R32 Submittals 23
115V Heat Pump Only 23
115V Heat Pump + Elec Heat 24
230V Heat Pump Only 25
230V Heat Pump + Elec Heat 26
CONTENTS
Ephoca is constantly innovating and improving its products and reserves the right to modify product design and specifi -
cations without notice and without incurring any obligations.
Ephoca is the US subsidiary of Innova SRL - Via 1° Maggio, 8 – 38089 Storo (TN) Italy.
© 2025 Ephoca. All rights reserved.
AIO Wall Mounted Pro units are slim and sleek. The wall-mounted unit can be mounted high or low with a factory-supplied bracket,
making installation quick and simple. An electronically controlled louver with an auto-swing function distributes airflow comfortably
and uniformly. Wall-mounted units are ideal for any area with free wall space. The onboard touch controller simplifies use and instal-
lation. Special adapters enable the unit to be installed perpendicular to an outside wall, used with many louver styles, or even vented
through an existing window frame with no construction required. Wall’s powerful external ECM condenser fan sits inside the vent
pipe or adapter.
Array
(
[0] => Array
(
[0] => (APP10N3H1)
)
)
23
SUBMITTAL
AIO WALL MOUNTED PRO -115V - NO ELECTRIC HEAT - R32 -SUBMITTAL
(APP10N3H1)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted To Submitted By: P.O. Number:
General Features
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115 / 1 / 60
Voltage Range 103-127
Running Amps Cooling 6.9
Max Amps Cooling 14.7
Running Amps Heating 5.8
Max Amps Heating 14.2
MCA 20
Maximum Overcurrent Protection (A) 35
Recommend breaker size 20
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
1. EER2 and SEER2 are based on nominal capacity of 8,900 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 15.74
EER2 11.23
Rev. Cycle Max Heating Capacity (Btu/h) 14,500
Electric heat (Btu/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 14,500
HSPF2 8.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
21.6"
39.9"
6.9" 6.0"
Array
(
[0] => Array
(
[0] => (APE10N3H1)
)
)
24
SUBMITTAL
AIO WALL MOUNTED PRO -115V -900W ELECTRIC HEAT - R32 -SUBMITTAL
(APE10N3H1)
• BLDC inverter compressor
• ECM fans
• R32 Refrigerant
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds + Auto
• 10 Year limited warranty
includes 1 year parts and labor
and Additional 9
• Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted To Submitted By: P.O. Number:
General Features
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 115 / 1 / 60
Voltage Range 103-127
Running Amps Cooling 6.9
Max Amps Cooling 14.7
Running Amps Heating 13.6
Max Amps Heating 22.0
MCA 30
Maximum Overcurrent Protection (A) 40
Recommend breaker size 30
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 2,700
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
LCDI Power Cords
Electric Heat Whip Plug SKU
□ + 900W 72 in.NEMA 6-15PL220v15a
1. EER2 and SEER2 are based on nominal capacity of 8,900 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 15.74
EER2 11.23
Rev. Cycle Max Heating Capacity (Btu/h) 14,500
Electric heat (Btu/h) 3,070
Total Heat Capacity w/ Elec (Btu/h) 17,570
HSPF2 8.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
21.6"
39.9"
6.9" 6.0"
Array
(
[0] => Array
(
[0] => (APP10N3H2)
)
)
25
AIO WALL MOUNTED PRO - 230V - NO ELECTRIC HEAT - R32 -SUBMITTAL
(APP10N3H2)
• BLDC inverter compressor
• ECM fans
• R32Refrigerant
• Intelligent defrost
• No outdoor unit
• Condensate disbursement
systems
• Onboard touch controller
• Optional add-on ERV
• Washable filter
• Electronically controlled air
louver
• Compact, slim design
• 3 selectable fan speeds +
Auto
• 10 Year limited warranty in-
cludes 1 year parts and labor
and Additional 9 Made in Italy
Job Reference Construction
Location ApprovalQuote Number
Engineer Date Drawing Number
Submitted To Submitted By: P.O. Number:
General Features
SUBMITTAL
General Accessories
□ ERV AWERV30
□ Underbody Cover Plate GB0737II
□ Underbody Cover Plate for unit w/ERV GB0737I4
□ Reducer Plate from 8” to 6” RED2016
Wall Controllers + Gateways
□ Wireless Remote WRCH20
□ Basic Touch Controller LTCH20
□ Recessed Touch Controller RTCH20
□ Advanced TFT Controller with 7-Day program TFTH20
□ Wireless (AA Battery) Infrared Controller with
7-Day program
WIPT20
□ Third Party Gateway TPG015
□ Modbus MODH20
□ WiFi App WIFI30
□ E-Paper EOS Controller EEOS12
□ Simple EOS Controller SEOS12
□ BACnet BACH20
1. EER2 and SEER2 are based on nominal capacity of 8,900 Btu/H
2. COP/ HSPF2 are based on nominal capacity of 8,200 Btu/h. COP/HSPF2 only
take intro consideration the heat pump and not electric heat
Performance Specifications
Cooling Capacity (Btu/h) 15,000
SEER2 15.74
EER2 11.23
Rev. Cycle Max Heating Capacity (Btu/h) 14,500
Electric heat (Btu/h) N/A
Total Heat Capacity w/ Elec (Btu/h) 17,570
HSPF2 8.45
Circulation (CFM) 160-290
Dehumidification (Pts/h) 1.9
Electric Specifications
Electric Heat
Power Supply (V Ph, Hz) 230 / 1 / 60
Voltage Range 180-253
Running Amps Cooling 3.4
Max Amps Cooling 7.8
Running Amps Heating 2.9
Max Amps Heating 7.1
MCA 10
Maximum Overcurrent Protection (A) 20
Recommend breaker size 15
Max Power Input (watts) Cooling 1,800
Max Power Input (watts) Heating 1,800
LCDI Power Cords
Electric Heat Whip Plug SKU
□ None 72 in.NEMA 6-15PL115v15a
21.6"
39.9"
6.9" 6.0"